Technical data

Through varying several attributes such as:
  • direction of lamination
  • resin coating
  • density

we are able to produce dehonit® qualities, that meet your specific requirement.

For a personal advice please do not hesitate to contact us.

dehonit® Material Grades for Mechanical work

      Parallel Crosswise Crosswise Crosswise Crosswise Crosswise Crosswise Parallel
  Quality   A 840 B 140 B 240 B 340 B 840 B 335-1 B 735-1 E 730-1
  DIN 7707   KP20216 KP20226 KP20226 KP20226 KP20226 KP20227 KP20227 KP20215
Mechanical Properties Unit Standard                
Density g / cm³ DIN
53 479		 1,40 1,40 1,40 1,40 1,40 1,35 1,35 1,30
Flexural strength
I   II		 N / mm² DIN
53 452		 240 180 174 170 155 150 140 180
Module of elasticity in flexural N / mm² DIN
53 452		 22.000 16.000 15.000 15.000 14.000 16.000 15.000 19.000
Compressive strength
I		 N / mm² DIN
53 454		 125 280 250 240 230 250 240 140
Impact resistance
I		 kJ / m² DIN
53 453		 61 41 40 40 36 26 28 30
Impact resistance
with slot
II		 kJ / m² DIN
53 453		 60 39 37 35 34 15 18 28
Impact resistance
with slot
I		 kJ / m² DIN
53 453		 52 21 20 18 15 13 20 25
Tensile strength
 N / mm² DIN
53 455		 208 156 144 135 124 89 85 160
Thermal conductivity

at 20°C

 W / (m K) DIN
52 612		 0,25 0,25 0,25 0,25 0,25 0,30 0,30 0,30
Coefficient of linear expansion 1 / K - 8 x 10-6 8 x 10-6 8 x 10-6 8 x 10-6 8 x 10-6 8 x 10-6 8 x 10-6 7 x 10-6
Water absorption
 % DIN
53 495		 5 2,5 3 4 5 0,7 0,7 1

Length of test samples must be cut parallel with the main fibre.
The above values are mean test results.

I = vertical
II = parallel